Vector ALU instruction latencies are understandably listed as 2 and higher, but this is not strictly the case. From AMD's Zen 5 optimization manual [1], we have
The floating point schedulers have a slow region, in the oldest entries of a scheduler and only when the scheduler is full. If an operation is in the slow region and it is dependent on a 1-cycle latency operation, it will see a 1 cycle latency penalty.
There is no penalty for operations in the slow region that depend on longer latency operations or loads.
There is no penalty for any operations in the fast region.
To write a latency test that does not see this penalty, the test needs to keep the FP schedulers from filling up.
The latency test could interleave NOPs to prevent the scheduler from filling up.
Basically, short vector code sequences that don't fill up the scheduler will have better latency.
So if you fill up the scheduler with a long line of dependent instructions, you experience a significant slowdown? I wonder why they decided to make it do that instead of limiting size/fill by a bit. What all the tradeoffs were.
This matches my experience with Zen in basically any generation. Once you've used all of the tricks and exhausted all of the memory and storage bandwidth, you'll still have compute left.
It's often faster to use one less core than you hit constraints at so that the processor can juggle them between cores to balance the thermal load as opposed to trying to keep it completely saturated.
I had real code that ran with IPC > 6 on Zen 3; I think that's the first time I've seen a modern CPU _really_ be ALU-bound. :-) But it was very unusual, and when I vectorized it, it ran completely different.
Given how Apple's M4 Core can access all of the L2 Cache ( it is shared ) and has a SLC ( System Level Cache ) one could argue it is better to compare it to AMD X3D variant on Cache size. However on Geekbench 6 it is still off by 30-40% per clock. Even if we consider zero performance improvement from M5, it would be a large jump for Zen 6 to catch up.
And that is also the case with Qualcomm's Oryon and ARM's own Cortex X93x series.
Still really looking forward to Zen 6 on server though. I cant wait to see 256 Zen 6c Core.
AMD had two leapfrogging CPU design teams. Memory renaming was added by the team that did Zen2, presumably the Zen3 team couldn't import it in time for some reason.
Dunno about writeups but I've worked in that system. Basically the product lifecycle is longer than one product generation. So you get to stay with it through the development, test/release, and maintenance phases, which are arranged to be 2 release cycles. It didn't seem paradoxical or anything. It just made sense.
It depends on having two CPU teams, though. There are not that many teams in the world that can design a high-performance microprocessor; I would assume that AMD has two and Apple has only one (which is why you got all these fillers with just larger and larger M1s in a trenchcoat, while the team was busy trying to make M3 happen).
At the bottom of the post is a link to a PDF of "The microarchitecture of Intel, AMD, and VIA CPUs - An optimization guide for assembly programmers and compiler makers" [0]
You might want to download it and just take a look at it so you know that this content exists.
The linked PDF in the post contains a section on how the values are measured and a link to the test suite. Search in [1] for "How the values were measured". For another project that measures the same/very similar values you can check out [2]. They have a paper about the tool they are using [3].
There is also AMD's "Software Optimization Guide" that might contain some background information. [4] has many direct attachments, AMD tends to break direct links. Intel should have similar docs, but I am currently more focused on AMD, so I only have those links at hand.
> All vector units have full 512 bits capabilities except for memory writes. A 512-bit vector write instruction is executed as two 256-bit writes.
That sounds like a weird design choice. Curious if this will affect memcpy-heavy workloads.
Writes aside, Zen5 is taking much longer to roll out than I thought, and some of AMD's positioning is (almost expectedly) misleading, especially around AI.
AMD's website claims Zen5 is the "Leading CPU for AI" (<https://www.amd.com/en/products/processors/server/epyc/ai.ht...>), but I strongly doubt that. First, they compare Zen5 (9965), which is still largely unavailable, to Xeon2 (8280), a 2 generations older processor. Xeon4 is abundantly available and comes with AMX, an exclusive feature to Intel. I doubt AVX-512 support with a 512-bit physical path and even twice as many cores will be enough to compete with that (if we consider just the ALU throughput rather than the overall system & memory).
Well, when you consider that AVX 512 instructions have 2 or 3 reads per 1 write, there's a degree of sense here.
Consider the standard matrix multiplication primitive the FMAC / multiply and accumulate: 3 reads and one write if I'm counting correctly .... (Output = A * B + C, three reads one output).
AMD CPUs tend to have more memory bandwidth than Intel CPUs and inference is CPU bound, so their claim seems accurate to me.
Whether the core does a 512-bit write in 1 cycle or 2 because it is two 256-bit writes is immaterial. Memory bandwidth is bottlenecked by 64GB/sec per CCX. You need to use cores from multiple CCXs to get full bandwidth.
That said, the EYPC 9175F has 614.4GB/sec memory bandwidth and should be able to use all of it. I have one, although the machine is not yet assembled (Supermicro took 7 weeks to send me a motherboard, which delayed assembly), so I have no confirmed that it can use all of it yet.
Interesting design. 16 CCDs / 16 CCXs / 16 cores. 1 core per each CCD. 1 CCX per each CCD. With 512MB of L3 cache this CPU should be able to use ~all of its ~10 TB/s of L3 MBW out of the box.
How much is it going to cost you to build the box?
It may be easier for the memory controller to schedule two narrower writes than waiting for one 512-bit block or perhaps they just didn't substantially update the memory controller and so it still has to operate as it did in Zen 4.
AMX is indeed a very strong feature for AI. I've compared Ryzen 9950X with w7-2495X using single-thread inference of some fp32/bf16 neural networks, and while Zen 5 is clearly better than Zen 4, Xeon is still a lot faster even considering that its frequency is almost 1GHz less.
Now, if we say "Zen5 is the leading consumer CPU for AI" then no objections can be made, consumer Intel models do not even support AVX-512.
Also, note that for inference they compare with Xeon 8592+ which is the top Emerald Rapids model. Not sure if comparison with Granite Rapids would have been more appropriate but they surely dodged the AMX bullet by testing FP32 precision instead of BF16.
It's probably a design choice that is driven by power consumption. 512 bit writes are probably used rarely enough that the performance benefits do not outweigh the additional power consumption that would be borne by all memory writes.
This is a misreading of their website. On the left, they compare the EPYC 9965 (launched 10/10/24) with the Xeon Platinum 8280 (launched Q2 '19) and make a TCO argument for replacing outdated Intel servers with AMD.
On the right, they compare the EPYC 9965 (launched 10/10/24) with the Xeon Platinum 8592+ (launched Q4 23), a like for like comparison against Intel's competition at launch.
The argument is essentially in two pieces - "If you're upgrading, you should pick AMD. If you're not upgrading, you should be."
It’s true that they compare to different Intel CPUs in different parts of the webpage, and I don’t always understand the intentions behind those comparisons.
Still, if you decode the unreadable footnotes 2 & 3 in the bottom of the page - a few things stand out: avoiding AMX, using CPUs with different core-counts & costs, and even running on a different Linux kernel version, which may affect scheduling…
If a laptop will need to be plugged in to deliver full performance, whilst blasting fans at full throttle, what is the point? (apart from server / workstation use, where you don't like MacOS or need different OS)
Friend of mine has laptop with Intel Ultra 9 185h. It is always plugged because when you don't plugin in, it is crawling (like even struggles to open Word). Fans are always spinning and it is loud.
For doing any kind of work that requires focus it is an absolute nightmare.
But she need a laptop to occasionally take it to Uni.
Her issue is not the form factor. Is it the RAM ? did she activate all the marketing apps ? Is a bitcoin farmer running in the background ? I don't know, but it's worth looking into it.
For comparison, I have at hand a Surface Pro 8 that should be 3x slower than hers on sheer CPU benchmarks, and I can throw any run of mill task at it (do the taxes with 3~4 word documents, Excel, dozens of tabs in firefox and a call session in the background) and it's fine. It will burn trough battery life within an two or three hours under that load, and yes the fans will be running, but I have no issue of having it crawl when unplugged.
Depends on your usecase. For a thin 14" laptop an M4 is probably the closer sweet spot, but for CPU heavy workloads Apple doesn't offer anything comparable to Threadripper or EPYC (lots of fast cores, enough memory and I/O bandwidth).
AMD’s documentation for the CPU may or may not state such things as “There are six integer ALUs, four address generation units, three branch units, four vector ALUs, and two vector read/write units”, but even if it does, Agnes Fog runs actual code to check that, and often discovers corner cases that the official documentation doesn’t mention.
So, he black box tests the CPU to try and discover its innards.
> Integer vector instructions and floating point vector instructions now have the same latencies.
There is very little reason to use integers for anything anymore. Loop counter? Why not make it a double - you never know when you might need an extra 0.5 loops at the end!
At least historically integer operations also offered lower latency and higher throughput on CPUs. For decades integer addition and bitwise logical operations have been the canonical single-cycle instructions that any microarchitecture could perform at least once per cycle without visible latency while floating point operations and integer multiplication had multi-cycle latency if it was even fully pipelined.
Zen 5 breaks several performance "conventions" e.g. AMD went directly from one to three complex scalar integer units (multiplication, PDEP/PEXT, etc.).
Intel effectively has two vector pipelines and the shortest instruction latency is a single cycle while Zen 5 has four pipelines with a two cycle minimum latency. That's a *very* different optimisation target (aim for eight instead of two independent instructions in flight) for low level SIMD code going forward despite an identical instruction set.
[1] https://www.amd.com/content/dam/amd/en/documents/processor-t...
It's often faster to use one less core than you hit constraints at so that the processor can juggle them between cores to balance the thermal load as opposed to trying to keep it completely saturated.
thanks
And that is also the case with Qualcomm's Oryon and ARM's own Cortex X93x series.
Still really looking forward to Zen 6 on server though. I cant wait to see 256 Zen 6c Core.
> since 2013, Intel offers a feature called "intel processor tracing [2]
> [not answered]
> When will AMD cpus introduce Intel-PT tech or the Intel branch trace store feature? (2024) [3]
> [not answered]
Is Intel-PT over-engineered and not really needed in practice?
[1] https://github.com/janestreet/magic-trace/wiki/How-could-mag...
[2] https://community.amd.com/t5/pc-processors/amd-ipt-intelpt-i...
[3] https://community.amd.com/t5/pc-processors/will-amd-cpus-hav...
You might want to download it and just take a look at it so you know that this content exists.
[0] https://www.agner.org/optimize/microarchitecture.pdf
There is also AMD's "Software Optimization Guide" that might contain some background information. [4] has many direct attachments, AMD tends to break direct links. Intel should have similar docs, but I am currently more focused on AMD, so I only have those links at hand.
[1] https://www.agner.org/optimize/instruction_tables.pdf
[2] https://www.uops.info/background.html
[3] https://arxiv.org/abs/1911.03282
[4] https://bugzilla.kernel.org/show_bug.cgi?id=206537
That sounds like a weird design choice. Curious if this will affect memcpy-heavy workloads.
Writes aside, Zen5 is taking much longer to roll out than I thought, and some of AMD's positioning is (almost expectedly) misleading, especially around AI.
AMD's website claims Zen5 is the "Leading CPU for AI" (<https://www.amd.com/en/products/processors/server/epyc/ai.ht...>), but I strongly doubt that. First, they compare Zen5 (9965), which is still largely unavailable, to Xeon2 (8280), a 2 generations older processor. Xeon4 is abundantly available and comes with AMX, an exclusive feature to Intel. I doubt AVX-512 support with a 512-bit physical path and even twice as many cores will be enough to compete with that (if we consider just the ALU throughput rather than the overall system & memory).
Consider the standard matrix multiplication primitive the FMAC / multiply and accumulate: 3 reads and one write if I'm counting correctly .... (Output = A * B + C, three reads one output).
Whether the core does a 512-bit write in 1 cycle or 2 because it is two 256-bit writes is immaterial. Memory bandwidth is bottlenecked by 64GB/sec per CCX. You need to use cores from multiple CCXs to get full bandwidth.
That said, the EYPC 9175F has 614.4GB/sec memory bandwidth and should be able to use all of it. I have one, although the machine is not yet assembled (Supermicro took 7 weeks to send me a motherboard, which delayed assembly), so I have no confirmed that it can use all of it yet.
This was a typo. It should have been “inference is memory bandwidth bound”.
How much is it going to cost you to build the box?
Now, if we say "Zen5 is the leading consumer CPU for AI" then no objections can be made, consumer Intel models do not even support AVX-512.
Also, note that for inference they compare with Xeon 8592+ which is the top Emerald Rapids model. Not sure if comparison with Granite Rapids would have been more appropriate but they surely dodged the AMX bullet by testing FP32 precision instead of BF16.
On the right, they compare the EPYC 9965 (launched 10/10/24) with the Xeon Platinum 8592+ (launched Q4 23), a like for like comparison against Intel's competition at launch.
The argument is essentially in two pieces - "If you're upgrading, you should pick AMD. If you're not upgrading, you should be."
Still, if you decode the unreadable footnotes 2 & 3 in the bottom of the page - a few things stand out: avoiding AMX, using CPUs with different core-counts & costs, and even running on a different Linux kernel version, which may affect scheduling…
If a laptop will need to be plugged in to deliver full performance, whilst blasting fans at full throttle, what is the point? (apart from server / workstation use, where you don't like MacOS or need different OS)
Getting near desktop performance when plugged but portability and lower consumption when unplugged is a pretty good tradeoff.
For doing any kind of work that requires focus it is an absolute nightmare.
But she need a laptop to occasionally take it to Uni.
The CPU in itself should be pretty good by modern standards: https://www.cpubenchmark.net/cpu.php?cpu=Intel+Core+Ultra+9+...
> (like even struggles to open Word).
Her issue is not the form factor. Is it the RAM ? did she activate all the marketing apps ? Is a bitcoin farmer running in the background ? I don't know, but it's worth looking into it.
For comparison, I have at hand a Surface Pro 8 that should be 3x slower than hers on sheer CPU benchmarks, and I can throw any run of mill task at it (do the taxes with 3~4 word documents, Excel, dozens of tabs in firefox and a call session in the background) and it's fine. It will burn trough battery life within an two or three hours under that load, and yes the fans will be running, but I have no issue of having it crawl when unplugged.
And they suck big time. And, to add insult to injury, there are also desktops which use laptop CPUs, with the same (lack of) performance.
What sort of work load that sucks big time? Assuming the work load is even laptop focused in the first place.
Desktops for gaming? AMD makes the best gaming CPUs with the X3D series.
Most of the workforce use Windows.
You can also use Linux if you want on Intel&AMD.
M CPUs are great but constrained by Apple.
So, he black box tests the CPU to try and discover its innards.
Agner
https://www.agner.org/optimize/instruction_tables.pdf
There is very little reason to use integers for anything anymore. Loop counter? Why not make it a double - you never know when you might need an extra 0.5 loops at the end!
Zen 5 breaks several performance "conventions" e.g. AMD went directly from one to three complex scalar integer units (multiplication, PDEP/PEXT, etc.).
Intel effectively has two vector pipelines and the shortest instruction latency is a single cycle while Zen 5 has four pipelines with a two cycle minimum latency. That's a *very* different optimisation target (aim for eight instead of two independent instructions in flight) for low level SIMD code going forward despite an identical instruction set.